Changelog

ATTENTION: Settings can often be wiped when a new firmware is released. Check the upgrade guide for more information

  • 12/11/24: Firmware 0.6.3 released
    • Fix inaccuracy with Quantizer
    • Fix display issue with rendered Quantizer note
  • 08/11/24: Firmware 0.6.2 released
    • Fix issue with MD-002 Gin Play/Rec button handling
  • 08/08/24: Firmware 0.6.1 released
    • Fix crash when clearing channel and envelope or random morph parameter is selected
    • Fix issue envelope skew/decay indexing
  • 05/08/24: Firmware 0.6.0 released
    • Added Lorenz chaos waveform
    • Added Operand advanced parameter
    • Reworked Quantizer with support for 8 custom scales, better modulation system and a new key editor
    • Random waveform reworked to support new Blend parameter
    • Phase retriggering added
    • Copy Paste channel functionality added
    • Amplitude and Offset units now in terms of voltage rather than percentage
    • Added Select Tap window setting
    • UI/UX improvements to settings
    • Encoder responsiveness improvements
  • 07/05/24: Firmware 0.5.3 released
    • Add small delay on bootup before initialising SD card
  • 28/03/24: Firmware 0.5.2 released
    • Fix offset in unipolar mode
  • 06/03/24: Firmware 0.5.1 released
  • 29/02/24: Firmware 0.5.0 released
    • Add new waveforms, Tan and Stair-step
    • Rework Sin morph
    • 4 quadrant multiplication / polarization / inversion modulation added. Amplitude now ranges from +100 to -100
    • Support for fractional (1/10th) BPM synchronization. Available from the SYSTEM settings
    • Fix a serious recorder overdub bug, along with some fixes to Gin
    • Rework the CV input to handle bipolar and unipolar signals better
    • Optimized power consumption & heat dissipation
    • Improved error handling
    • Other small fixes
  • 23/01/24: Firmware 0.4.6 released
    • Optimize recorder resulting in faster read speeds
    • Improve Reset Mode (formally known as Run Reset)
    • Numerous fixes for waveform modulation UX
    • Function generator mode will now return to 0.0V after the cycle ends
    • Improved error reporting and handling
  • 28/12/23: Firmware 0.4.5 released
    • Improved responsiveness of envelope waveform
    • Phase now modifiable when frequency modulating (applicable for Function Generator mode)
    • Fix phase offset bug in Function Generator mode
    • Fix sample & hold negative threshold
    • Other small fixes
  • 03/11/23: Firmware 0.4.4 released
    • Fixes to trigger logic
    • Time modulation is now inverted in relation to Frequency
    • Smarter wiping of user data when upgrading firmware
  • 27/10/23: Firmware 0.4.3 released
    • Rework Random waveform morph logic for stair-step and slew
    • Greatly improve Frequency fine / course parameter changes
    • Fix Mix and fine / course parameter changes
    • Reduce duration to switch between fine / course modes
    • Tweak Exp waveform exponent
  • 20/10/23: Firmware 0.4.2 released
    • Fix quickslot assign issue when assigning quick-slot to top item in the list
  • 10/10/23: Firmware 0.4.1 released
    • Improve DAC reliability
    • Fix an issue with default states
  • 09/10/23: Firmware 0.4.0 released
    • Frequency can now be de-synchronized, allowing for a range of 1mHz to 128Hz
    • Input Focus now supports modulation
    • Added trigger support. Channels can now be triggered by an external CV source, or any of the other internal channels
    • “Envelope” waveform replaces the “Exp” and R.Exp” waveforms
    • Course and fine grain mode for parameter changes has been added
    • Added state management. States are saved directly to the SD Card
    • States can be recalled with “Quick-slots”, up-to 8 quick-slots can be used
    • Added recorder links
    • Unipolar mode amplitude now scales from 0% to make it more appropriate for feeding unipolar CV to VCAs and alike
    • Random waveform now respects the Phase setting
    • Fixed modulation inconsistencies
    • Added screensaver
    • Lots of smaller fixes and optimizations
  • 06/08/23: Firmware 0.3.2 released
    • Recorder trigger fixes and improvements
    • Rework run modes and reset logic, added run gate latch
    • GUI fixes
  • 24/07/23: Firmware 0.3.1 released
    • Full MD-002 Gin capability
    • Added recorder bar progress UI indicator
    • Much improved recorder streaming and error handling
    • Added new SYSTEM menu
  • 08/05/23: Firmware 0.2.3 released
    • Added Recorder overdub capability
    • Improved Recorder UI indicators
    • Recorders using dynamic length recordings can now reach a maximum of 65536 bars
    • Added performance mute mode
    • Added new “modulation selector” for Waveform and Morph: allows the user to select discrete values to modulate between
    • Added “Inverter” advanced function
    • Added “Output” waveform
    • Added “Input Focus” functionality, allowing to adjust input behaviour for improved reusability
    • Improved control responsiveness
    • Fix a synchronization issue with continuous recorder modes using non-integer record lengths/bpms
    • Fix an issue with phase synchronization
    • Fix BPM detect issue for asymmetric clocks
    • Added initial support for MD-002
    • Other small fixes and improvements
    • ➡️ Please note when upgrading from 0.1.x to 0.2.x, it is advised to reformat the SD Card. See docs for details.
  • 01/03/23: Firmware 0.1.5 released
    • Added dynamic recorder lengths, quantized to a 4/4 time signature
    • Added “goto modulator” channel shortcut
    • Added “goto previous” channel shortcut
    • Improved external clock detection
  • 26/11/22: Firmware 0.1.4 released
    • Added Wavefolder, accessible as an advanced function
    • The Sample and Hold (S&H) unit now can be configured for either traditional sampling or tracking (T&H)
    • Fix issues with Phase synchronization, added Phase modulation
    • Channel select within Parameter menus are now highlighted with brighter LEDs
    • Added button shortcuts for changing the parameter while in the parameter menu
  • 02/11/22: Firmware 0.1.3 released
    • Fix an issue in the recorder when using single-shot mode
    • Adjust timings of channel select overlays
  • 26/10/22: Firmware 0.1.2 released
    • Increase maximum record duration to 255 bars
    • Settings of a channel can now be modified during recorder playback
    • Many useability improvements to controls, overlays and menus
    • Bug fixes
  • 06/10/22: Firmware 0.1.1 released
    • Single-shot and continuous mode recorders, along with better trigger support
    • Modulation enhancements, including an additional offset parameter
    • Sample & hold improvements and fixes
    • Improve GUI overlays
    • Bug fixes
  • 15/09/22: MD-001 Juniper is now available
  • 14/08/22: The first production run of MD-001 Juniper underway 🎉
  • 24/04/22: MD-001 closed beta begins
  • 18/03/22: Announcing MD-001 Juniper: an 8 channel synced modulation source in 8HP. Coming in Q1 2022.